When choosing a suitable serial terminal application, each specimen of software should be reviewed under its own merit to ensure its suitability for the intended task. It should be noted that each of the terminal applications mentioned in this blog were tested for the specific purpose of receiving with a high baud rate. Further to the recent addendum testing PCTerm, this application may replace TeraTerm in some instances. Personally, i am habitual in installing software such as RealTerm and TeraTerm on computers involved in software or hardware development. PCTerm, RealTerm and TeraTerm are noteworthy Windows based serial terminal applications which would serve hobbyists and professionals alike. The properties of the SCB UART displayed the 3Mbaud UART data rate. PSoC Creator Top Design SCB UART with 24MHz External Clock Using the UART SCB component with an external 48MHz clock resulted in the required 3Mbaud data rate. As this clock rate results in only 1.5Mbaud, the HFClock was increased to 48MHz. The COM port number for the connection.PSoC Creator Changes for PCTerm The default HFClock 'HFClk' for the PSoC Creator UART is 24MHz. Go to the Windows device manager and find Download Realterm and install according to theģ. Realterm can be downloaded on free of charge.ġ. Even though Realterm is used as an example to establish a remote connection, any terminal program can be used that has similar functionality. The following instructions apply to version 2.0.0.70. Realterm is a terminal program that can be used to communicate with a device attached to the serial port of a PC or via an emulated serial port via USB. Manufacturer: GW-INSTEK Model number : PSW-XXX-X Serial number : TW123456 Firmware version : 0101įor further details, please see the programming manual, available on the GW Instek web site Using Realterm to Establish a Remote Connection
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |